The Little Stuff

Personalised Gruffalo-Style Woodland Balloon Bouquet Kit

£15.99 GBP

Sale Sold out

Taxes included. Shipping calculated at checkout.

Style Number 1 Number 2 Number 3 Number 4 Number 5 Number 6 Number 7 Number 8 Number 9

Quantity

(Instruction is the QR code on the packaging, please scan it by smart phone camera to get the link, please do apply multiple stick dots on the joints when putting them together)
Super cute Gruffalo themed balloon bouquet decoration approx. 1.3m height, it comes in a flat pack with a light 40inch pine green number, mixed 5inch and 12inch balloons, 4 -pack artificial leaves and Gruffalo figure cards print. No helium needed, with instructions it will be easily done by yourself.

How it works

This DIY standing balloon bouquet kit is designed for busy parents — inflate the latex balloons, twist them into clusters to build a sturdy base, then stack and glue your number and character balloons on top. No helium needed; air inflation keeps it floor-standing for the party.

Inflate the latex balloons to an even size (about 20–22 cm) with a hand pump.
Tie balloons into pairs, then twist pairs into cross-shaped clusters.
Stack the clusters on the ribbon and wrap firmly to form a stable base.
Inflate the foil number/character balloons (slightly soft is easier) and stick them on with glue dots.
Add any stickers or extras, then display standing on the floor.

Full step-by-step instructions — also linked via QR in the kit.

Details

Pack includes: 12-pack 12" latex balloon in mixed brown, sand, sage colours. 6-pack 5" toffee, sand, smoke orange balloons. 1-pack 40" light pine green number balloon. 4-pack artificial leaves, 1-pack Gruffalo and log print cards.

Instructions

Before You Start

Tips:

Do not over inflate the foil number balloon or any small foil balloons. A slightly softer balloon is much easier to attach using the glue dots.

Inflate all latex balloons to the same size for the best-looking result.

You'll Need:

Balloon pump

Measuring tape or ruler

Step 1 – Inflate the Balloons

Inflate 12 x 12-inch latex balloons to approximately 20–22 cm (8–8.5 inches).

Tip: Use a ruler, measuring tape or another object as a guide to keep all balloons the same size.

Step 2 – Make Balloon Pairs

Tie 2 balloons together to create 6 pairs.

Pick the balloon colour you like to put together, blow them up to similar size, tie 2 balloons together to make a pair

Step 3 – Make Balloon Clusters

Take 2 balloon pairs and place one on top of the other to form a cross.

Twist the tied centres together to create 1 balloon cluster.

Don't worry if the balloons move slightly – as long as they are securely twisted together, they'll be fine.

Repeat until you have 3 balloon clusters.

Step 4 – Build the Base

Lay the ribbon flat on the floor or a table.

Place the first balloon cluster on top of the ribbon.

Step 5 – Add the Second Cluster

Place the second cluster on top of the first, turning it about 45°.

Wrap the ribbon through the gaps between the balloons several times, pulling firmly to secure them together.

Step 6 – Finish the Base

Place the third cluster on top, again rotating it about 45°.

Continue wrapping the ribbon through the balloon gaps several times.

Pull the ribbon tight until the base feels secure, then tie a firm knot.

Your balloon base is now complete.

Step 7 – Inflate the Number Balloon

Inflate the foil number balloon.

If your kit includes a personalised name sticker, apply it now.

Step 8 – Attach the Number

Place the number balloon on top of the base and adjust it until you're happy with the position.

Use multiple glue dots to attach it securely.

For the best support, apply glue dots to both the front and back of the balloon where it touches the base.

Step 9 – Add the Decorations

Attach the included 5-inch balloons and any other decorations using the glue dots.

Arrange them to match the product photo or create your own design.

Extra Tip

For numbers 4 and 7, you may need to place one or two extra balloons underneath the foil number to help support the weight. Extra balloons are included in your kit.

Video Tutorials

How to Make a Balloon Dog Bone

https://www.youtube.com/watch?v=3OkQPha5X38

Thank you for choosing The Little Stuff!

We'd love to see your finished creation. Tag us in your photos!

Shipping & returns

We aim to dispatch all orders within 1 business day using 48-hour tracked services. For urgent orders, please select the next-day option at checkout.

Returns: For most standard (non-personalised) items, returns are accepted within 30 days of delivery if the item remains unused and in a resalable condition. Personalised, engraved, custom or made-to-order items cannot be returned or refunded for change of mind (for example name-engraved baubles, personalised cake toppers, and balloons/decorations with a custom name or message). This does not affect your statutory UK consumer rights if an item is faulty, damaged, or not as described — please contact us at contact@thelittlestuff.co.uk. Full details: Refund policy.

We hope you enjoy shopping with us!